How to Use a Hammer?
Table of Contents
If you work in an industry that requires you to drive nails or other fasteners and tools into a sturdy material, you’ll likely need to know the ins and outs of how to use a hammer and what types of hammers – click here to find the top one for you. However, although many people know what hammers look like, they are surprisingly unaware about how they can properly use these tools. Luckily, these techniques are not hard to learn – they just require patience and the willingness to perfect one’s technique.
How to use a Hammer Safely?
If you’re starting to use hammers in your line of work for the first time, you need to be able to learn how to use the tool properly. One of the most important things you can do to accomplish this is to slow the process down and practice the technique one part at a time. You’ll want to start by making sure you have all the necessary tools. If you’re working with older material that tends to chip easily, you’ll need to wear a pair of safety goggles to protect your eyes.
It is also advisable to wear a pair of gloves to prevent any of the chipped or splintered materials from getting into your skin. These things may not cause major injuries, but they are injuries that you can easily avoid. The next thing you’ll want to do is practice driving your fastener in without using too much force. It may be tempting to try those big swings to start out with and drive the fastener in as fast as possible. However, doing this will likely cause you to develop an improper technique that may cause you to injure yourself or destroy your materials in the future.
Instead of going for the big swings that you’re used to seeing other contractors and professionals take on, start by getting used to the weight of the tool. First, start by holding the hammer near the nail you’re trying to drive in and tap the nail gently. This will help you get a feel for how much pressure you really need to drive the nail in and what angle you need to hold the hammer at for the best results.
You’ll be able to get work done quickly and efficiently once you’ve mastered this technique thanks to the consistency of your hits. Additionally, you’ll be able to work from this point to get more accurate with using your hammer and you’ll be able to move on to using bigger swings and hits to drive your nails in.
How to Hammer a nail into a Wall?
In order to hammer a nail into the wall, you’ll first need to determine the exact spot you want to drive the nail into. You don’t want it to be off by even a centimeter – there’s no need to patch up holes when you could have taken a little extra time to do the job right the first time. Once you’ve determined where you want the nail to go, hold it carefully with one hand. Then, grab your hammer and gently tap it into the wall until you’ve driven it in far enough that you don’t need to hold it anymore.
Once you’ve done this, you’ll be able to take bigger hits with your hammer and drive your nail in farther. However, if you need to leave part of the nail hanging out to hang up a picture frame or something similar, be careful not to drive it in too far. You may be able to take part of it out by using the claw on the back of your hammer, but there is a chance that you could damage the wall or bend the nail by trying this.
Preventing Hammer Injuries
The best way to prevent injuries from using your hammer is to make sure that you take safety precautions before you even start working. This means that you need to take your working environment and projects into consideration before you start hammering away at your target. However, regardless of what type of space you’re working in, there are a few things that will always be considered standard safety procedures.
The first thing you’ll want to do is find a sturdy pair of safety goggles. You may not think that you would encounter enough situations to warrant wearing safety goggles, but you’d be surprised by how much debris your hammer can kick up. However, this can be easily avoided by making sure you always protect your eyes when you work. You should make wearing safety goggles a standard procedure when you do any type of hands on work – your eyes are your most important asset.
Another thing you should take into consideration is what kind of protection you’re using for your hands. You don’t want them to get splinters or shards of the material you’re working with under your skin. The best way to avoid this is to wear a thick pair of gloves. This should also be something you look at as standard safety gear. If you injure your hands, you will at the very least slow down the progress of your work and could potentially be unable to work for a few days or even weeks.
It is better to avoid these issues before they arise by taking safety precautions than to have to respond to situations that arise because you were unprepared. Although the safety precautions you’ll need to take will vary by worksite, it is safe to say that these two steps will always be part of safety procedures you’ll need to adopt. Though it may seem like an unnecessary precaution to take, it will pay off in the end and will help you avoid small mishaps that could derail your entire project.