Makita 5007MGA Circular Saw Review


The Makita 5007MGA Circular Saw has a great design with features such as a rubber grip, on-tool blade wrench and dual led lights which illuminate your cut line for maximum visibility.  This saw is well balanced powerful tool which has exceptional cutting capabilities.  Very easy to maneuver, the high powered blade cuts through wood effortlessly and cleanly.  The positive bevel stops quick enough to create common bevel angles.  The Makita 5007MGA Circular Saw is top rated by users and for good reason.

Technical Specs

The blade is located on the right hand side of the tool which makes it well balanced and comfortable to use.  This tools blade is a standard sized 7 ¼ inch blade and a 5/8 inch arbor blade which makes it possible to fit other blades necessary for different applications. You can pick up any standard replacements at your regular hardware store.

This laser does not come with a laser beam guide but it does however, have two highly visible led lights that illuminate your cut line for maximum visibility.  This high powered saw runs on standard 120V electricity and can be used in conjunction with a generator or inverter if no power source is available.


The rubber grip handle makes the saw more comfortable to hold and control, giving the user full confidence of use.  The integrated measuring tool has oversized numbers and markings on it which makes them easy to read and take note of while the saw is in use.  A convenient spindle lock ensures that the spindle is in place with the press of a button so that you can use a single hex key to safely remove and alternate between blades.  The on tool wrench stores on the saw itself so you never need to go digging around for one when you need it.


The device comes with a durable heavy duty carry case.  This not only makes it easy for the tool to be transported without damage but it also keeps the sharp blades tucked away safely.  The saw weighs 10.6 pounds which is a bit heavier than its counterparts but the rubber grip handle makes it easy and comfortable to control.  Standing at 10 inches high and 9.5 inches wide, it is a very well balanced saw.  An 8.5 ft electric cord provides tool with power and can be used with a generator for areas where there is no power outlet available.


The 15 amp saw blades runs at 5,800RPM which is fast enough to cut through a wide variety of sheet materials.  It comes with a rip fence which can be attached to the shoe for faster more consistent cuts.  The measuring instrument is clearly marked for easy and accurate readings while operating the saw.  Mostly used for wood applications but simple blade switches allow for use on a wide variety of materials.

Other Important Specs

This tool can cut to a maximum depth of 2-1/2 inches at a 90 degree angle allowing you to cut through any 2x material.  At 45 degrees the depth of cut is 1-3/4 inches and the maximum bevel capacity is 56 degrees.  This means that you are able to cut bevels at any angle between 0 and 56 degrees.  This saw comes with a 1 year guarantee which covers any manufacturer’s defects and it comes with a fully downloadable offline instruction manual.

Why We Liked It

We liked it because of its 56 degree bevel capacity as well as two positive bevel stops for cutting common angles.  The built in dust blower keeps the cut line clear of debris and the power cord is reinforced, making it great for the jobsite. Here are more of our favorite features:


  • On tool blade wrench
  • 5,800 RPM and 15 amp motor
  • Led lights for better cut line visibility
  • 24T carbide tipped blade
  • Built in rip fence

Leave a Reply

Your email address will not be published. Required fields are marked *