How To Use A right Angle Drill?

This tool might sound a bit intimidating since it isn’t one you often hear of but that does not need to be the case. With a little know how and some practise, you will have it down in no time flat. These tools were originally designed for construction professionals but they are slowly making their way into our everyday toolboxes.  This type of drill is primarily used for those areas or applications which cannot be reached by a standard size drill or screw driver.

Usually used with one hand except when using an added drill attachment. Both hands are needed to keep the attachment steady during drilling or fastening applications. The specialized ABS material does not heat up during use, allowing you to ho9ld it throughout the whole process. A right angle drill is used in the way you would use a normal sized drill. The only difference is that the head is at a 90 degree angle to allow for fastening and drilling in confined spaces.

Right Angle Drill Attachment

A drill attachment is an extra attachment which you can purchase to use with your existing angle drill. The type of attachment will be decided by the type of project you are going to be doing and the type of material you will be using. First you need to decide if you do actually need an extra attachment or if your tool will perform well on its own.  Test to see if your toll will reach the desired area on its own before going out and buying the first attachment you come across.

If you do find that your drill needs some extra oomph then it you should consider some of the features and specs of an attachment. Keep in mind that not all attachments will be suitable and therefore it will save you time and money if you do some research beforehand. Make sure the attachment has a true 90 degree head which uses a 1 inch bit tip and a steadfast ring magnet for proper support during use.  The last thing you want is a wobbly tool when you are already pressed for space.

Drilling Holes In Tight Spaces

This is a tough thing to do even for the most practised and patient professionals. However, with the correct tools and a little know how you will soon be tackling those hard to reach beams and joists. The best tool for drilling a hole in a tight space would be a right angle drill. There are certain attachments that are available on the market to give your device better reach.

Some are only designed to be a right angle drill which makes them limited but still a tool with great benefits. With the use of an extension cord, your reach is extended even further, allowing you drill holes anywhere you please. These work especially well in tight spaces like behind beams and joists.

Unlike conventional drills, a right angle drill is held with both hands for better balance and accuracy in those tight, hard to reach places. If you regularly find yourself in a tight spot then you need to get yourself a good quality right angle drill.

Corded Right Angle Drill

The difference between corded and bare tool right angle drills, besides the obvious cord, is a personal preference. It all boils down to what you are looking for in a drill and what kind of applications you will be using is on. Corded drills have the advantage of always being ready to use, as long as you have an electrical power source available, you are good to go.

Obviously you will need to figure out what length cord will be best suited to ensure that you do not end up with your cord pulling out halfway through your task. Battery operated drills are called bare tools and do not need an extension cord to be powered. This is great when you do don’t want to struggle with lengthy cords or if you do not have an electric power outlet available.

The downside however, is that your drill batteries need to be charged every now and again. This means you won’t be able to use it while it is on charge although some batteries charge faster than others. So a corded drill is not better than a bare tool and vice versa it is merely a personal decision that you need to make. What suits your project best will not necessarily suit someone else’s.

About the Author

Bob Robinson has been a tool enthusiast and lawn care expert for the past 11 years. First working with John Deere to reduce their impact on the environment, whilst building his love for writing in his spare time. Now, Bob runs the editorial team at BestofMachinery and tends to his garden in his spare time.

We hope you enjoyed our article on "How To Use A right Angle Drill?", if so, please share and rate it.


    Leave a Reply